Achievement Unlocked!

-

     Since COVID-19 reared its ugly head around March of 2020, it has been a year of uncertainty. My job as a project manager let me work from home for most of the year. With my work laptop set up next to my shack computer, I had FT8 going almost constantly. The sporadic-E season let me earn 6-meter Worked All States and I kept going on HF after the conditions shifted.

    I achieved the Digital Mixed Worked All States award from the ARRL a few weeks ago! The certificate finally arrived today.


    My next goal is to earn my Digital 5BWAS (5-band WAS) before the end of the year!


73,

Korey--WA5RR

Comments

Post a Comment

Popular posts from this blog

2020 222 and Up Distance Challenge for WA5RR/R

-
Image
     Although there isn't much activity on the UHF bands in this part of rural North Texas, I decided to go out to see what I could stir up. Although I thought I might cover four grids, I adjusted due to conditions and only went to two.      As I pulled into my first spot on I-44 Exit 1 in Oklahoma, I saw a sign of good luck. Opening the door and looking straight ahead, I found this nice gift on the ground!      The antenna and mast went up in about 15 minutes. I really seem to have an efficient system now for 'stop-and-shoot' operations. Antennas up top are Directive Systems 'rover special' beams for 1.25m and 70cm. Although excellent antennas, I worked a majority of my contacts on my vehicle mounted Larsen NMO2/70 vertical antenna using FM. Those gleaming antennas still looked gorgeous in the Red River valley sun!      My first contact on 70cm was with N5XTR who was seven miles away in EM04. He and I chatted a bit o...
Read more

Give Me More Power, Scotty!

-
Image
Well, today I did some 'horse trading' and swapped an HF amp, which is useless to me in my current QTH, and obtained a VHF amplifier. I was looking for at least 100-watts and a mobile platform and found an RF Concepts RFC-2-117. This amp takes 10-watts input and puts out up to 170-watts. Here's the amp: I also tested the 7-element 2-meter beam last night to check into the North Texas Sidewinders on Two (SWOT) net. When Bob, W5FKN in Decatur, TX opened the net by reading the preamble, I was able to copy him while he was turned due south of me. This is the first time I've ever been able to hear him until he starts turning towards Tulsa! Also, the beam picked up check-ins from Houston and Shreveport which I could not normally hear. I kept switching back-and-forth using my new 2-position Diawa switch going between the Big Wheel and the beam. So, I've proven that reaching some of the major population centers from my limited neighborhood setup is definitely possi...
Read more

10-GHz Transceiver and CW Interface Idea

-
Image
     I posted a few weeks ago about my plans to use some inexpensive Doppler motion sensors as 10-GHz transmitters. At the time, I wasn't entirely sure on how I would transmit with it. To do so with this module, you modulate the input voltage and can use an audio input device such as a computer, MP3 player or something similar.      Surfing around a Facebook group a few nights ago led me to find the Four State QRP Group. On their site, I saw a Super Simple Code Practice Oscillator. It has audio output to a small speaker and a rudimentary key built onto the circuit board. Eureka---this gave me an idea.      The SSCPO will lose its speaker and I'll replace it with a 3.5mm audio jack for output and forgo the key switch and install a connector for an external straight key or keyer. With this setup, I can use the audio output to connect to my HB100 transmitter to provide the required modulation. As a bonus, I can also use it with my Radio Shac...
Read more